Operator that extracts Face degrees of freedom for NCMesh in parallel. More...

#include <prestriction.hpp>

Inheritance diagram for mfem::ParNCH1FaceRestriction:

Collaboration diagram for mfem::ParNCH1FaceRestriction:

Public Member Functions
	ParNCH1FaceRestriction (const ParFiniteElementSpace &fes, ElementDofOrdering ordering, FaceType type)
	Constructs an ParNCH1FaceRestriction. More...

void	Mult (const Vector &x, Vector &y) const override
	Scatter the degrees of freedom, i.e. goes from L-Vector to face E-Vector. More...

void	AddMultTranspose (const Vector &x, Vector &y) const override
	Gather the degrees of freedom, i.e. goes from face E-Vector to L-Vector. More...

void	AddMultTransposeInPlace (Vector &x, Vector &y) const override
	Gather the degrees of freedom, i.e. goes from face E-Vector to L-Vector. More...

void	NonconformingInterpolation (Vector &x) const
	Apply a change of basis from coarse element basis to fine element basis for the coarse face dofs. More...

void	NonconformingTransposeInterpolation (const Vector &x) const
	Apply a change of basis from fine element basis to coarse element basis for the coarse face dofs. More...

void	NonconformingTransposeInterpolationInPlace (Vector &x) const
	Apply a change of basis from fine element basis to coarse element basis for the coarse face dofs. More...

Public Member Functions inherited from mfem::H1FaceRestriction
	H1FaceRestriction (const FiniteElementSpace &fes, const ElementDofOrdering ordering, const FaceType type)
	Construct an H1FaceRestriction. More...

void	Mult (const Vector &x, Vector &y) const override
	Scatter the degrees of freedom, i.e. goes from L-Vector to face E-Vector. More...

void	AddMultTranspose (const Vector &x, Vector &y) const override
	Gather the degrees of freedom, i.e. goes from face E-Vector to L-Vector. More...

Public Member Functions inherited from mfem::FaceRestriction
	FaceRestriction ()

	FaceRestriction (int h, int w)

virtual	~FaceRestriction ()

void	MultTranspose (const Vector &x, Vector &y) const override
	Set the face degrees of freedom in the element degrees of freedom y to the values given in x. More...

Public Member Functions inherited from mfem::Operator
void	InitTVectors (const Operator Po, const Operator Ri, const Operator *Pi, Vector &x, Vector &b, Vector &X, Vector &B) const
	Initializes memory for true vectors of linear system. More...

	Operator (int s=0)
	Construct a square Operator with given size s (default 0). More...

	Operator (int h, int w)
	Construct an Operator with the given height (output size) and width (input size). More...

int	Height () const
	Get the height (size of output) of the Operator. Synonym with NumRows(). More...

int	NumRows () const
	Get the number of rows (size of output) of the Operator. Synonym with Height(). More...

int	Width () const
	Get the width (size of input) of the Operator. Synonym with NumCols(). More...

int	NumCols () const
	Get the number of columns (size of input) of the Operator. Synonym with Width(). More...

virtual MemoryClass	GetMemoryClass () const
	Return the MemoryClass preferred by the Operator. More...

virtual Operator &	GetGradient (const Vector &x) const
	Evaluate the gradient operator at the point x. The default behavior in class Operator is to generate an error. More...

virtual void	AssembleDiagonal (Vector &diag) const
	Computes the diagonal entries into diag. Typically, this operation only makes sense for linear Operators. In some cases, only an approximation of the diagonal is computed. More...

virtual const Operator *	GetProlongation () const
	Prolongation operator from linear algebra (linear system) vectors, to input vectors for the operator. `NULL` means identity. More...

virtual const Operator *	GetRestriction () const
	Restriction operator from input vectors for the operator to linear algebra (linear system) vectors. `NULL` means identity. More...

virtual const Operator *	GetOutputProlongation () const
	Prolongation operator from linear algebra (linear system) vectors, to output vectors for the operator. `NULL` means identity. More...

virtual const Operator *	GetOutputRestrictionTranspose () const
	Transpose of GetOutputRestriction, directly available in this form to facilitate matrix-free RAP-type operators. More...

virtual const Operator *	GetOutputRestriction () const
	Restriction operator from output vectors for the operator to linear algebra (linear system) vectors. `NULL` means identity. More...

void	FormLinearSystem (const Array< int > &ess_tdof_list, Vector &x, Vector &b, Operator *&A, Vector &X, Vector &B, int copy_interior=0)
	Form a constrained linear system using a matrix-free approach. More...

void	FormRectangularLinearSystem (const Array< int > &trial_tdof_list, const Array< int > &test_tdof_list, Vector &x, Vector &b, Operator *&A, Vector &X, Vector &B)
	Form a column-constrained linear system using a matrix-free approach. More...

virtual void	RecoverFEMSolution (const Vector &X, const Vector &b, Vector &x)
	Reconstruct a solution vector x (e.g. a GridFunction) from the solution X of a constrained linear system obtained from Operator::FormLinearSystem() or Operator::FormRectangularLinearSystem(). More...

void	FormSystemOperator (const Array< int > &ess_tdof_list, Operator *&A)
	Return in A a parallel (on truedofs) version of this square operator. More...

void	FormRectangularSystemOperator (const Array< int > &trial_tdof_list, const Array< int > &test_tdof_list, Operator *&A)
	Return in A a parallel (on truedofs) version of this rectangular operator (including constraints). More...

void	FormDiscreteOperator (Operator *&A)
	Return in A a parallel (on truedofs) version of this rectangular operator. More...

void	PrintMatlab (std::ostream &out, int n, int m=0) const
	Prints operator with input size n and output size m in Matlab format. More...

virtual void	PrintMatlab (std::ostream &out) const
	Prints operator in Matlab format. More...

virtual	~Operator ()
	Virtual destructor. More...

Type	GetType () const
	Return the type ID of the Operator class. More...

Protected Attributes
const FaceType	type

InterpolationManager	interpolations

Vector	x_interp

Protected Attributes inherited from mfem::H1FaceRestriction
const FiniteElementSpace &	fes

const int	nf

const int	vdim

const bool	byvdim

const int	face_dofs

const int	elem_dofs

const int	nfdofs

const int	ndofs

Array< int >	scatter_indices

Array< int >	gather_offsets

Array< int >	gather_indices

Array< int >	face_map

Protected Attributes inherited from mfem::Operator
int	height
	Dimension of the output / number of rows in the matrix. More...

int	width
	Dimension of the input / number of columns in the matrix. More...

Additional Inherited Members
Public Types inherited from mfem::Operator
enum	DiagonalPolicy { DIAG_ZERO, DIAG_ONE, DIAG_KEEP }
	Defines operator diagonal policy upon elimination of rows and/or columns. More...

enum	Type { ANY_TYPE, MFEM_SPARSEMAT, Hypre_ParCSR, PETSC_MATAIJ, PETSC_MATIS, PETSC_MATSHELL, PETSC_MATNEST, PETSC_MATHYPRE, PETSC_MATGENERIC, Complex_Operator, MFEM_ComplexSparseMat, Complex_Hypre_ParCSR, Complex_DenseMat, MFEM_Block_Matrix, MFEM_Block_Operator }
	Enumeration defining IDs for some classes derived from Operator. More...

Protected Member Functions inherited from mfem::H1FaceRestriction
	H1FaceRestriction (const FiniteElementSpace &fes, const ElementDofOrdering ordering, const FaceType type, bool build)
	Construct an H1FaceRestriction. More...

void	CheckFESpace (const ElementDofOrdering ordering)
	Verify that H1FaceRestriction is build from an H1 FESpace. More...

void	SetFaceDofsScatterIndices (const Mesh::FaceInformation &face, const int face_index, const ElementDofOrdering ordering)
	Set the scattering indices of elem1, and increment the offsets for the face described by the face. More...

void	SetFaceDofsGatherIndices (const Mesh::FaceInformation &face, const int face_index, const ElementDofOrdering ordering)
	Set the gathering indices of elem1 for the interior face described by the face. More...

Protected Member Functions inherited from mfem::Operator
void	FormConstrainedSystemOperator (const Array< int > &ess_tdof_list, ConstrainedOperator *&Aout)
	see FormSystemOperator() More...

void	FormRectangularConstrainedSystemOperator (const Array< int > &trial_tdof_list, const Array< int > &test_tdof_list, RectangularConstrainedOperator *&Aout)
	see FormRectangularSystemOperator() More...

Operator *	SetupRAP (const Operator Pi, const Operator Po)
	Returns RAP Operator of this, using input/output Prolongation matrices Pi corresponds to "P", Po corresponds to "Rt". More...

Detailed Description

Operator that extracts Face degrees of freedom for NCMesh in parallel.

Objects of this type are typically created and owned by ParFiniteElementSpace objects, see ParFiniteElementSpace::GetFaceRestriction().

Definition at line 30 of file prestriction.hpp.

Constructor & Destructor Documentation

mfem::ParNCH1FaceRestriction::ParNCH1FaceRestriction	(	const ParFiniteElementSpace &	fes,
		ElementDofOrdering	ordering,
		FaceType	type
	)

Constructs an ParNCH1FaceRestriction.

Parameters

[in]	fes	The ParFiniteElementSpace on which this operates
[in]	ordering	Request a specific ordering
[in]	type	Request internal or boundary faces dofs

Definition at line 26 of file prestriction.cpp.

Member Function Documentation

void mfem::ParNCH1FaceRestriction::AddMultTranspose	(	const Vector &	x,
		Vector &	y
	)		const

overridevirtual

Gather the degrees of freedom, i.e. goes from face E-Vector to L-Vector.

Parameters

[in]	x	The face E-Vector degrees of freedom with the given format: face_dofs x vdim x nf where nf is the number of interior or boundary faces requested by type in the constructor. The face_dofs should be ordered according to the given ElementDofOrdering.
[in,out]	y	The L-vector degrees of freedom.

Implements mfem::FaceRestriction.

Definition at line 94 of file prestriction.cpp.

void mfem::ParNCH1FaceRestriction::AddMultTransposeInPlace	(	Vector &	x,
		Vector &	y
	)		const

overridevirtual

Gather the degrees of freedom, i.e. goes from face E-Vector to L-Vector.

Parameters

[in,out]	x	The face E-Vector degrees of freedom with the given format: face_dofs x vdim x nf where nf is the number of interior or boundary faces requested by type in the constructor. The face_dofs should be ordered according to the given ElementDofOrdering.
[in,out]	y	The L-vector degrees of freedom.

Note: This method is an optimization of AddMultTranspose where the x Vector is used and modified to avoid memory allocation and memcpy.

Reimplemented from mfem::FaceRestriction.

Definition at line 101 of file prestriction.cpp.

void mfem::ParNCH1FaceRestriction::Mult	(	const Vector &	x,
		Vector &	y
	)		const

overridevirtual

Scatter the degrees of freedom, i.e. goes from L-Vector to face E-Vector.

Parameters

[in]	x	The L-vector degrees of freedom.
[out]	y	The face E-Vector degrees of freedom with the given format: face_dofs x vdim x nf where nf is the number of interior or boundary faces requested by type in the constructor. The face_dofs are ordered according to the given ElementDofOrdering.

Implements mfem::FaceRestriction.

Definition at line 43 of file prestriction.cpp.

void mfem::ParNCH1FaceRestriction::NonconformingInterpolation ( Vector & x ) const

Apply a change of basis from coarse element basis to fine element basis for the coarse face dofs.

Parameters

[in,out] x The dofs vector that needs coarse dofs to be express in term of the fine basis.

Definition at line 49 of file prestriction.cpp.

void mfem::ParNCH1FaceRestriction::NonconformingTransposeInterpolation ( const Vector & x ) const

Apply a change of basis from fine element basis to coarse element basis for the coarse face dofs.

Parameters

[in] x The dofs vector that needs coarse dofs to be express in term of the coarse basis, the result is stored in x_interp.

Definition at line 108 of file prestriction.cpp.

void mfem::ParNCH1FaceRestriction::NonconformingTransposeInterpolationInPlace ( Vector & x ) const

Apply a change of basis from fine element basis to coarse element basis for the coarse face dofs.

Parameters

[in] x The dofs vector that needs coarse dofs to be express in term of the coarse basis, the result is stored in x_interp.

Definition at line 119 of file prestriction.cpp.

Member Data Documentation

InterpolationManager mfem::ParNCH1FaceRestriction::interpolations

protected

Definition at line 34 of file prestriction.hpp.

const FaceType mfem::ParNCH1FaceRestriction::type

protected

Definition at line 33 of file prestriction.hpp.

Vector mfem::ParNCH1FaceRestriction::x_interp

mutableprotected

Definition at line 35 of file prestriction.hpp.

The documentation for this class was generated from the following files:

fem/prestriction.hpp
fem/prestriction.cpp

Public Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation